| Features |
| Dimensions (W x H x D) |
12 mm x 31.5 mm x 21 mm |
|
| Sensing distance |
≤ 12.5 mm |
|
| Sensing distance tolerance |
± 3 mm |
|
| Housing design |
Small |
|
| Light source |
LED, RGB |
1) |
|
| Wave length |
470 nm, 525 nm, 625 nm |
|
| Light emission |
Long side of housing |
|
| Light spot size |
1.6 mm x 9.5 mm |
|
| Light spot direction |
Vertical 2) |
|
| Receiving filters |
None |
|
| Adjustment |
Teach-in button |
|
| Teach-in mode |
2-point teach-in static/dynamic + proximity to mark
ET: Teach-in dynamic |
|
| 1) Average service life: 100,000 hat TU = +25 °C. |
| 2) In relation to long side of housing. |
| Mechanics/electronics |
| Supply voltage |
12 V DC ... 24 V DC 1) |
|
| Ripple |
≤ 5 Vpp |
2) |
|
| 1) |
Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. |
|
|
| 2) |
May not fall below or exceed UV tolerances. |
|
|
| 3) |
Without load. |
|
|
| 4) |
With light/dark ratio 1:1. |
|
|
| 5) |
Signal transit time with resistive load. |
|
|
| 6) |
Total current of all Outputs. |
|
|
| 2 CONTRAST SENSORS | SICK Product data sheet | 2024-12-05 14:30:50 |
| |
Subject to change without notice |
| |
KTM-WP11181P | KTM |
| |
|
CONTRAST SENSORS |
| Current consumption |
< 50 mA 3) |
|
| Switching frequency |
15 kHz 4) |
|
| Response time |
32 µs |
5) |
|
| Jitter |
15 µs |
|
| Switching output |
PNP |
|
| Switching output (voltage) |
PNP: HIGH = UV ≤ 2 V / LOW approx. 0 V |
|
| Switching mode |
Light/dark switching |
|
| Output current Imax. |
50 mA 6) |
|
| Input, dynamic teach-in (ET) |
PNP: Teach: U = 10,8 V ... < UV
PNP: Run: U < 2 V or open |
|
| Retention time (ET) |
28 ms, non-volatile memory |
|
| Time delay |
None |
|
| Connection type |
Male connector M8, 4-pin |
|
| Protection class |
III |
|
| Circuit protection |
UV connections, reverse polarity protected
Output Q short-circuit protected
Interference pulse suppression |
|
| Enclosure rating |
IP67 |
|
| Weight |
20 g |
|
| Housing material |
ABS |
|
| Optics material |
PMMA |
|
| Indication |
LED indicator green: power on
LED indicator, yellow: Status switching output Q |
|
1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
2) May not fall below or exceed UV tolerances.
3) Without load. |
| 4) With light/dark ratio 1:1. |
5) Signal transit time with resistive load.
6) Total current of all Outputs.
Ambient data |
| Ambient operating temperature |
–10 °C ... +55 °C |
|
| Ambient temperature, storage |
–20 °C ... +75 °C |
|
| Shock load |
According to IEC 60068 |
|
| UL File No. |
NRKH.E348498 & NRKH7.E348498 |
|
| Connection type/pinouts |
| Connection type |
Male connector M8, 4-pin |
|
| Pinouts |
BN 1
WH 2
BU 3
BK 4 |
+ (L+)
ET
- (M)
Q |
|
| Classifications |
| ECLASS 5.0 27270906 |
| 2024-12-05 14:30:50 | Product data sheet CONTRAST SENSORS | SICK 3 |
| Subject to change without notice |
| KTM-WP11181P | KTM |
| CONTRAST SENSORS |
| ECLASS 5.1.4 |
27270906 |
|
| ECLASS 6.0 |
27270906 |
|
| ECLASS 6.2 |
27270906 |
|
| ECLASS 7.0 |
27270906 |
|
| ECLASS 8.0 |
27270906 |
|
| ECLASS 8.1 |
27270906 |
|
| ECLASS 9.0 |
27270906 |
|
| ECLASS 10.0 |
27270906 |
|
| ECLASS 11.0 |
27270906 |
|
| ECLASS 12.0 |
27270906 |
|
| ETIM 5.0 |
EC001820 |
|
| ETIM 6.0 |
EC001820 |
|
| ETIM 7.0 |
EC001820 |
|
| ETIM 8.0 |
EC001820 |
|
| UNSPSC 16.0901 |
39121528 |
|
